Yancheng Qingquan Pump Industry Co., Ltd.
Contact: Jin Qiang
Address: No. 2, Building 10, Area B, No. 96 Huanghai East Road (Dayang Industrial Park), Tinghu District, Yancheng City
Flow (Q): up to 20,000 m3 / h
Head (H): up to 30m
Working pressure (P): 1.0MPa
Working temperature (t): 0 ℃ ～ + 80 ℃
The mixed flow pump is a "pull-out" structure pump. When inspecting and removing the impeller and shaft seal, it is not necessary to disassemble the pipeline connected to the pump body. Equipped with precision-machined pump shaft and thin oil lubricated bearings, a protective shaft sleeve is installed in the stuffing box cover. The oil level of the bearing box can be controlled by the constant oil cup.
The feet of the pump body can withstand any load from the pipeline and directly transfer to the foundation. In this way, the rotor will not bend due to the load on the pump, thereby ensuring the best service life of the bearing.
Reduced blockage due to larger overcurrent area.
The rotation direction of the pump is clockwise when viewed from the drive end.
The power drive may use an electric motor or an internal combustion engine.
The pump device can be equipped with a complete air release device, which is conducive to the exhaust of the suction line.
Packing seal or double end mechanical seal.
Corrosion resistant material.
GB / T 13008-2010 "Technical conditions for mixed flow pump and axial flow pump"
GB 3216-89 "Test methods for centrifugal pumps, mixed flow pumps, axial flow pumps and vortex pumps"
GB / T 18149-2000 "Specifications for hydraulic performance test of centrifugal pumps, mixed flow pumps and axial flow pumps"
GB / T 13469-1992 "Economic operation of industrial centrifugal pumps, mixed flow pumps, axial flow pumps and vortex pump systems"