⎝⎛金鲨银鲨⎞⎠

tel.png

Service Hotline

13815577882

内页banner

Product Categories

contact us

Yancheng Qingquan Pump Industry Co., Ltd.

Contact: Jin Qiang

Phone: 0515-88599646

Mobile: 13815577882/13921843913

Email: 1327299809@qq.com

Fax: 0515-88599646

Address: No. 2, Building 10, Area B, No. 96 Huanghai East Road (Dayang Industrial Park), Tinghu District, Yancheng

Website: ovirx.com

Vertical mixed flow pump manufacturers

Your current location : ⎝⎛金鲨银鲨⎞⎠ >> Products >> Mixed flow pump

Vertical mixed flow pump manufacturers

  • 立式混流泵厂家
  • Category: mixed flow pump

  • hit count:
  • Release Date: 2019/04/23
  • Online Inquiry
  • Detailed introduction

立式混流泵



Advantages of vertical mixed flow pump

(1) Simple operation of horizontal pumps. Because the impellers are all above the water surface, before the pump is started, a vacuum pump is used to fill the pump with water. Due to the impellers of vertical pumps, they are generally sunk in water and can be started directly.

(2) Small installation area Including the driver, the vertical pump only needs half the space of the horizontal pump. Especially in today's large pumps, this advantage is even more outstanding.

(3) The impeller of the vertical pump that is beneficial to prevent cavitation is generally submerged in water, and the NPSH that can be used can be larger. Therefore, cavitation does not occur when the pump is operated at a flow larger than the planned point.

However, because it is a vertical shaft, the pump has a long longitudinal direction, and the lifting height of the crane is high when disassembling and assembling, and there must be sufficient space above the pump, which is a disadvantage of the vertical pump. However, vertical pumps are simply installed outdoors, so there is no doubt.

Regarding the maintenance of mixed-flow pumps , here the mixed-flow pump manufacturers emphasize that once the mixed-flow pump fails, do not disassemble it by yourself. When disassembling it by yourself, it is easy to cause the following two problems: one is to blindly dismantle one channel without knowing where the fault is; the other is that there is no special tool and often damages the original intact parts. The best way is to go to an experienced and large-scale repair point for repairs, and replace the over-aged parts and some wearing parts in time. Under normal circumstances, the pump should be repaired every six months to prevent work with "illness".

URL of this article: http://ovirx.com/product/604.html

Keywords: vertical mixed flow pump , vertical mixed flow pump manufacturer , vertical mixed flow pump price

Recently Viewed:

    Related Products:

    related ⎝⎛金鲨银鲨⎞⎠:

    • online service
    • contact number
      13815577882
    • Leave message
    • Online consultation
    • Tencent QQ
    • 天天电玩城 星力捕鱼 亚洲城游戏中心 七乐彩